Guangzhou Kindwood Co., Ltd.

WOOD PLASTIC COMPOSITE DECKING ICC-ES REPORT

Physical and Mechanical(ASTM) test results in total

Flammability and Fire Rating Test Report

Toxicity test report(SGS)

Report Number:GZ08090168-2

Rroduct Evaluated: KINDWOOD®  Decking

Evaluation Property: UV resistance testing...

No.GP081120099

 Flexure Properity Test Report

Report Number:ZL090004-2 

Oxidative-Induction Time Test Report Result: The O.I.T of the sample is 26.0 min

Fungal resistance report for wood plastic composite boards

Warranty of wood plastic composite board

The wood plastic composite board from GuangZhou KindWood CO.,LTD. made by wood fiber and plastic is high-property green environmental protection material by using high polymer technology and modern computer production technology. It is a product giving years of serviceable life as an outdoor deck. The using of plastic ensures a weather and water resistant, and mixed with wood fiber gives it the properties to allow cutting just like wood.
The following warranty in terms of quality is issued by the manufacturer (GuangZhou KindWood Co.,Ltd.) to assure the quality standards for the use in decking structures.
Under the normal service condition, the manufacturer’s guarantee is a limited 10/20 years warranty against warping, twisting, or splitting of this product to the original owner. After buying, if there are any claims about quality problems from consumers, the consumers need to offer buying documents, test of relevant technological superintendent offices and decision of solving problems. In ten years, the product has warranty for 100 percent of the purchase price of the damaged pieces.
Removal cost is not included in the warranty, nor is improper installation of the sub-structure or ground preparation.
Fungal growth or staining is not a warranty issue, it is recommended periodic cleaning with approved deck cleaners will help to avoid such issues. Fungal growth or staining is caused by using the product in special environment, so it is recommended periodic cleaning with approved deck cleaners will help to avoid issues.
Wood-plastic composite board has UV protection, however, please bear in mind that over time there will be a slight fading of color, this is natural and not be a warranty issue.
Manufacturers will not change and compensate free because of consumer’s wrong use, improper installation, force majeure and damage that other factors have caused. In above-mentioned cause, consumers can’t claim from manufacturer on the grounds that manufactures do not offer enough knowledge of installation and operation.

1 Composition /Information on ingredients
Substance Name Weight %  TLV
Wood Fiber Dust 40-60 15 mg/m3 (total)
HD Polyethylene 30-50 NA
Trade Secret 5-15 2 mg/ m3 (respirable fraction)
Trade Secret 2-10 Not Established
Note: Contains thermoplastics and waste wood products. The product is extruded into
wood replacement items and is used in a wide variety of applications.
2 Hazards Identification
Effects of Overexposure: Inhalation of dust generated during processing can irritate nose, throat and respiratory tract. In some sensitive individuals, repeated exposures to certain wood dusts can produce allergic skin and respiratory reactions including asthma and rhinitis. Inhalation of certain wood fibers can cause nasal cancer.

Emergency Response Data: Natural Solid. Exposure to fire can generate toxic fumes. High dust levels may create potential for explosion.
3 First Aid Measures
Eye Contact: Flush thoroughly with water. If irritation occurs, contact appropriate health care professional.
Skin Contact: If irritation occurs, wash with soap and water.
Inhalation: If respiratory irritation, cough, shortness of breath, wheezing or chest tightness occurs after exposure to dust, remove person to fresh air, seek medical attention.
Ingestion: Not expected to be a problem when ingested. If uncomfortable, seek medical assistance.
4 Fire-Fighting Measures
Extinguishing media: Water, foam, dry chemical
Special Fire-fighting Procedures: Use water to keep exposed product cool. Fire fighters must use self-contained breathing apparatus in enclosed area.
Unusual fire and explosion Hazards: Exposure to fire can generate toxic fumes. High dust levels may create potential for explosion. Flash point >220 Degree (estimate)
NFPA Hazard ID. Health 0; Flammability: 1; Reactivity: 0
Hazardous Decomposition Product: Carbon monoxide, Acetaldehyde, Formic acid, Formaldehyde, Acetic acid.
5 Accidental Release Measures
Notification Procedures: None.
Procedures if material is Released or Spilled: Not Applicable for product in purchased form. Where dusty conditions are created as a result of cutting or sawing, wet sweep or vacuum dust for disposal. Personnel performing cleanup must use protective equipment.Environmental Precautions: Prevent spills from entering storm sewers or drains and contact with soil.
Waste Disposal Methods: Dispose in accordance with applicable Local regulations.
6 Handling and Storage
Handling: Do not use in applications where heavy structural loads or bracing is required. KindWood is heavier than most traditional lumber product; proper handling is required to prevent damage or injury. Do not burn in fireplace or use as firewood.
Storage: Do not store in open or unlabelled containers. Store away from strong
oxidizing agents or combustible material.
Storage Temperature: N/A
7 Personal Protection
Ventilation: Use with adequate ventilation in processing operations. No special
requirements under ordinary conditions of use and with adequate ventilation.
Respiratory Protection: Approved dust respirators must be used for dusty conditions or if breathing of dusts is likely. No special requirements under ordinary conditions of use and with adequate ventilation. 

Eye Protection: Safety glasses with side shields, or goggles, should be worn to protect against dust particles.
Skin Protection: No special equipment required. However, good personal hygiene
practices should always be followed.
8 Physical and Chemical Properties
Typical physical properties are given below
Appearance: Solid Vapor Density: NA
Color: Varies Evaporation Rate: NA
Odor: None Relative Density: >1.1g/cm3
Odor Threshold: NA Solubility in Water: Negligible
Boiling Point: NA Partition Coefficient: NE
Melting Point: NA Viscosity at 40 C, cSt: NA
Flash Point: >390 Degree (estimate) Viscosity at 100 C, cSt: NA
Auto Flammability: 440 Degree Pour Point C(F): NA
Explosive Properties: NA Freezing Point C(F): NA
Oxidizing Properties: NA Volatile Organic Compound: NE
NA = Not Applicable; NE = Not Established
9 Stability and Reactivity
Stability (Thermal, Light, Etc.): Stable
Conditions to Avoid:. Flame and extreme heat. Do not allow dust to build up in enclosed areas.
Incompatibility (materials to avoid): Strong oxidizers.
Hazardous Decomposition Products: Smoke, Carbon monoxide, Aldehyde, organic acid.
Hazardous Polymerization: Will not occur.
10 Toxicological Data
Acute Toxicology
Oral toxicity (Rats):Practically non-toxic (LD50: greater than 2000mg/kg)
(Based on testing of similar products and/or the components.
Dermal Toxicity (Rabbits): Not Applicable
Inhalation toxicity (Rats): Not Applicable – Harmful concentrations of mists and/or
vapors are unlikely to be encountered through any customary or reasonable oreseeable
handling, use or misuse of this product.
Eye Irritation (Rabbits): Not established
Skin Irritation (Rabbits): Practically non-irritating. (Primary irritation Index: 0.5 or less).
Based on testing of similar products and/or the components.
11 Ecological Information
Environmental fate and effects: Not established
12 Disposal Considerations
Waste Disposal: Dispose of waste as normal refuse
RCRA Information: The unused product is not specifically listed by the EPA as a hazardous waste (40 CFR, Part 261D) nor does it contain materials that are listed as hazardous wastes. It does not exhibit the hazardous characteristics and does not contain Toxicity Characteristics Leaching Procedure (TCLP) Compounds. However, used product may be regulated.
13 Transport Information
U.S. DOT: Not Regulated
Information given herein is offered in good faith as accurate, but without guarantee.
Conditions of use and suitability of the product for particular uses are beyond our control; All risks of use of the product are therefore assumed by the user and we expressly disclaim all warranties of every kind and nature, including warranties of merchantability and fitness for a particular purpose in respect to the use or suitability of the product. Nothing is intended as a recommendation for uses which infringe valid patents or as extending license under valid patents. Appropriate warnings and safe handling procedures should be provided to handlers and users.